In stock
|
Out of stock
|
||
|
The basis of this flashlight is a high-quality American-made Cree XP-L LED. He is able to work for 50,000 hours. The diode is installed in a lens made using a special technology that perfectly copes with focusing the light flux. The illumination range for the Fenix E16 model reaches 242 m.
The flashlight can work with batteries of different chemical composition. First of all, manufacturers advise using branded batteries with lithium-ion electrolyte, produced in the 16340 format. You can install batteries of similar format from other manufacturers in the battery compartment, which the user will be sure of. In addition to this, the supported format is also CR123A. These are lithium batteries and cannot be recharged. In any case, the battery compartment is designed for only 1 battery at a time, but the choice of its type will determine the operating parameters of the flashlight in different modes. To make it easier for the user to navigate the possible options, we present the characteristics of the Fenix E16 in all modes for both types of batteries.
With battery 16340:
Turbo brightness mode: brightness equal to 700 lumens, effective lighting distance - 142 m, operating time - 1 h 5 min, lighting intensity - 5050 cd;
High brightness mode: brightness is 150 lumens, illumination range - 66 m, operating time - 2 hours, illumination intensity - 1100 cd;
brightness mode Med: brightness equal to 30 lumens, effective illumination distance - 31 m, operating time - 11 h 55 min, illumination intensity - 240 cd;
Low brightness mode: brightness is 3 lumens, illumination range - 13 m, operating time - 70 h, illumination intensity - 40 cd;
Strobe mode: the brightness of the flashes is 700 lumens.
With CR123A battery:
Turbo brightness mode: brightness is 300 lumens, effective lighting distance - 93 m, operating time - 1 h 55 min, lighting intensity - 2160 cd;
brightness mode High: brightness is 150 lumens, effective lighting distance - 66 m, operating time - 2 hours 55 minutes, lighting intensity - 1100 cd;
brightness mode Med: brightness is 30 lumens, illumination range - 31 m, operating time - 25 h, illumination intensity - 240 cd;
Low brightness mode: brightness equal to 3 lumens, lighting range - 13 m, operating time - 110 h, lighting intensity - 40 cd;
Strobe operating mode: the brightness of the flashes is 300 lumens.
Another feature is that the low battery indicator for the Fenix E16 only works when a battery is installed. In case of using a battery, it will not warn the user that the battery needs to be replaced with a new one.
The body of the Fenix E16 is completely metal. The material for it is aluminum, which is resistant to oxidation and corrosion. The shell of the lantern is so well made that it completely isolates it from water. This flashlight can even be kept completely submerged in water for up to half an hour. Waterproofing according to the IP-68 standard will allow it to continue to work as before. The control button is also made of metal. It is located on the side of the case, closer to the head of the Fenix E16. The control of this model is intuitive and convenient. To prevent the flashlight from being discharged due to accidental activation in a bag or pocket, the button can be locked. To do this, you just need to click on it 2 times in 0.5 seconds. The blocking is also removed in the same way. When the unit is removed, just hold the button pressed for 0.5 seconds to turn on the flashlight. Regular short clicks will allow you to cycle through all brightness modes. And to activate the stroboscope, you need to hold the button down for 1.2 seconds. By the way, you can also block the switching on of the flashlight mechanically: by turning its clip so that it does not allow pressing the button.
The Fenix E16 model comes with a special metal ring so that you can wear it on a chain like a keychain. But this flashlight can be easily carried in your pocket. It weighs only 22 g without a battery.
Features:
Fenix E16 flashlight belongs to keychain models;
the length of the case is 51 mm;
the flashlight works with batteries and accumulators;
suitable battery formats - 16340, CR123A;
this model has a Cree XP-L diode;
the working potential of the diode is 50,000 hours;
the maximum possible brightness for this model is 700 lumens;
the flashlight works in 5 modes;
control is realized with just one button;
the body of the lantern is made of aluminum;
blocking of accidental activation is provided.
Equipment:
1. Lantern
2. Lanyard / Wrist strap
3. Key ring
4. Spare O-ring
5. Instruction
6. Warranty card
7. Information booklet