The Leatherman Super Tool 300 is built for hard work! Designed for tough and harsh use - work gloves do not need to be removed. Reinforced handles and tool holders.

A tool for which any task can be done.

The new pliers are the most powerful and strongest. They are now designed for even greater durability.

Powerful cutting pliers, the inserts of which can now be replaced if necessary. As a result, you can spare your tool and make the most of it!

Steel wire cutters, electric crimps, four screwdrivers, an awl - all these additions make the Super Tool 300 an indispensable tool!

Also on the pliers (at the base from the side of the handles), there are cutters for steel cables and a crimper, which can be used to strip the insulation from the wires.

In work, the pliers showed themselves from the best side. Working with gloves, sometimes you forget that you have a multitool in your hand, and not scrap Soviet pliers. The multitool box, which forms the handles, is now rolled up - nothing will cut into the hand. The pliers are laid out quite easily and confidently fixed in the open position. The multitool frame at the base of the pliers works like a spring to keep the handles from folding. The balisong effect is not observed - the multitool is moderately tightened on the axes. It is convenient to open the pliers with one hand, both by shaking, followed by fine-tuning, or simply with a brush.

The outermost tools can be removed separately (serrated, plain, saw and file). All mediums are taken out in a package and the necessary tool is already taken out of this package. A very good addition - a large rolled cutout in the multitool box on the side of the blades, for easy and quick removal of them, and a wide groove on the blades themselves. Also, both blades are additionally fixed in the closed position, according to the principle of locks in liner locks.

Plane blade, serrated blade, saw and file were made as long as possible. It is very convenient to bring the blades into a working position with gloves, even with one finger.

Double-sided file with a cross-shaped coarse cut and a smaller oblique cut.

There is also a notch on one of the edges, and it serves as a hacksaw for metal. Both a file and a hacksaw for metal cope with ordinary metal rolling quite confidently. Hardened rods and screws are also within their power.

Saw on wood. Quite competent execution of a small canvas. The tooth 2 mm high and 2 mm pitch is directed towards the handle,

so the saw does not "jump" when moving away from itself, but when moving towards itself, the entire efficiency of the blade is used. The thickness of the saw along the butt is less than the thickness of the teeth, so the saw does not jam in the material.

Number of functions: 19

Material: stainless steel

Folded length, mm: 115

Weight, g: 272

Features: safety ring

Tools:

01 Needlenose Pliers
02 Fuse Wire Cutters
03 Premium Replaceable Wire Cutters
04 Military Performance Spec Cap Crimper
05 Electrical Crimper
06 Wire Stripper
07 420HC Combo Knife
08 Saw
09 Replaceable T-shank Metal Saw
10 Replaceable C4 Punch
11 #8-32 Cleaning Rod/Brush Adapter
12 Awl w/ Thread Loop
13 Ruler (9 in | 22 cm)
14 Can Opener
15 Bottle Opener
16 Phillips Screwdriver
17 Large Screwdriver
18 Medium Screwdriver
19 Small Screwdriver