In stock
|
Out of stock
|
||
|
The Otis Deluxe Law Enforcement System is designed specifically for law enforcement officers. Contains cleaning tools for 5.56mm and 7.62mm rifles, 12ga shotguns, 9mm - .45cal pistols and subguns. Now all of these small arms can be cleaned and maintained with one complete compact cleaning system.
Supplied in a plastic container.
Kit contents
1. Nylon pouch with zipper for easy storage and transportation of the kit, attached to the equipment using the Molle system.
2. Six bronze bore cleaning brushes for calibers 5.56mm, 7.62mm, 9mm, .40 cal, .45 cal, 12 ga (size indicated on brush stem). The brushes use chemical-resistant bronze bristles for effective cleaning of dirt and durability of tools. Accurate diameters provide full rifling coverage on specific calibers.
3. 100% cotton 2” & 3” patches (10 each).
4. 30” and 8” Memory-Flex® cables.
5. Small, large & shotgun slotted tips — used with wipes to create a cleaning swab, one end has an 8-32 thread to connect to a Memory-Flex cable.
6. Small, large and pistol obstruction removers — used to knock clutter out of the barrel and clean it of dirt, snow or stuck cartridges, can also be used as the basis of a T-handle.
7. Large rubber patch saver® — used with cotton pads and a slotted tip to cover the barrel 360 degrees.
8. Plastic T-Handle — attaches a Memory-Flex cable for added comfort.
9. Short AP brush — provides a more aggressive cleaning, removes fresh carbon and gunpowder residue, but does not scratch the coating of the weapon.
10. Mini nylon end brush — used to lubricate the guides, and its bristles are stiff enough to clean dust from carbon deposits and other loose debris.
11. Brass scraper — for cleaning carbon deposits and other debris from the surface of the shutter, guides or any other flat surface of the weapon.
12. Straight and curved locking lug picks — for cleaning narrow slots and locking ledges of a rifle.
13. Male & female rods — used as a handle, connect to any Otis 8-32 threaded tool for added length for fine cleaning.
14. Pin punch — used to push the pins completely through the frame.
15. Thread connector — has 8-32 threads and screws into the Memory-Flex cable, allowing two cables to fit together, increasing the length for longer holes.
16. Reflector / chamber flag — allows you to mark an empty chamber to make sure it is safe.
17. Shooter’s Choice FP-10® Lubricant Elite®, 0.5 fl oz / 14.7 ml.
18. Instructions for cleaning in English.
Characteristics
Dimensions: 8.7 x 5.1 x 1.8 in
Weapon types: 5.56mm and 7.62mm rifles, 12ga shotguns, 9mm – .45cal pistols/subguns