|
In stock
|
Out of stock
|
||
|
|
|||
|
|
|||
Lithium polymer battery with increased voltage - 11.1 V.
Lithium polymer (Li-Po) batteries are the successor to the popular lithium-ion (Li-Ion) batteries. The main advantage of Li-Po batteries is undoubtedly the ratio of capacity to size / weight. Such batteries are very compact and at the same time energy efficient, which allows you to find the best option for almost any AEG drive. Lithium polymer technology has no memory effect and allows frequent recharging without the need for a full discharge. Charging is often the optimal operating mode for this type of battery.
Another important advantage of Li-Po batteries is their low self-discharge rate. During storage, the battery loses about 3-5% of its charge per month. However, keep in mind that long periods of unused storage can result in below the 3V per cell discharge and irreversible chemical reactions that can degrade battery performance, damage the battery, and in some cases, cause battery failure. fire.
Subject to the rules of use, a battery of this type will have a life of 500 - 700 cycles. Ambient temperature is also an important factor in durability. Unlike many other types of Li-Pol batteries, batteries perform well at low temperatures; however, they should be charged at room temperature. Also note that in order to maintain performance when charging such batteries, you need to use balancing when connected; For this, most Li-Po elements are equipped with a special connector, and high-quality chargers have built-in balancers.
Characteristics:
Technology: Li-Pol
Capacity: 1200mAh
Voltage: 11.1V
Connector type: Deans
Discharge current: 20/40C
Dimensions: 185 x 15 x 15 mm
Weight: 90 g
Current output: 20~40C
For LiPo and Li-Ion batteries, the warranty only covers switching on. The product cannot be returned or exchanged in the future!
Do not allow the battery to discharge below the maximum permissible level (3 V per section), this may cause damage, and in some cases, fire. An unused battery must be charged to 70%.
When using, it is also important not to allow overcharging above 4.2 V per section. The battery must be charged at room temperature. To maintain performance when charging, you must use balancing when connecting.
Do not allow the battery to completely discharge!
Do not store the battery at temperatures below 0 °C.
Do not use the machine at temperatures below -1 °C.