The Uniden SDS100 radio scanner is the first scanner to incorporate software-defined radio technology that delivers incredible digital performance even in the most complex radio frequency environments. The SDS100 digital scanner is better than any other scanner in both simultaneous transmission and weak signal conditions. SDS100 allows you to decide what to display, where and what color. Special fields place information that is important to you exactly where it is needed.

SDS100 complies with JIS4 (IPX4) water resistance standards.

True I / Q TReceiver - designed to improve digital performance even in the most complex RF environments. The I / Q receiver captures the full waveform in three dimensions, which improves error correction and digital signal recovery.

Operating frequency ranges: 25-512, 758-824, 849-869, 894-960 and 1240-1300 MHz

Support for digital standards APCO25, DMR (optional, subject to the purchase of a special DMR option) and ProVoice.

10th generation trunk tracker (TrunkTracker X), which supports trunking systems of APCO25 Phase I, APCO25 Phase II, X2-TDMA, Motorola SmartNet / SmartZone / Astro25, EDACS and LTR

Number of channels: no limit (depends on the size of the microSD card). In practice, many thousands of channels are available, which is enough for any task - even if you travel around the world and never clear your memory.

New Discovery mode - helps to detect new operating frequencies in both conventional and trunk mode.

New analyzer mode, including a number of submodes:

Spectrum analyzer

Measuring the power level of the received signal

Trunk systems analyzer

Logical Channel Number Finder (LCN) for EDACS / LTR systems

Ability to randomly select AM, NFM, FM, WFM or FMB modulation

Ability to randomly select step 5, 6.25, 7.5, 8.33, 10, 12.5, 15, 20, 25, 50, or 100 kHz

Large informative LCD display with a resolution of 160x192, containing icons and hundreds of characters of alphanumeric information

Text symbols can be up to 64 characters long.

Ability to link subscriber ID lists to a number of trunking sites, which provides ease of use and memory savings.

Signal strength indicator

Play the last 4 minutes of voice activity on demand

Record conversations manually on a microSD card

All data that the SDS-100 works with is stored on a flash card, so it can be easily copied to a PC or a second card for security

Scanning speed up to 80-125 channels per second, the best result among all available scanning receivers!

Ability to increase the scanning speed to 250-375 channels per second at a step frequency of 5 kHz

Close Call - captures signals in the near zone in fractions of a second and indicates the frequency of the detected signal

The industry's best search engine for CTCSS / PL subtones and DCS / DPL codes

Repeater frequency reverse function, which facilitates control and search of input frequency

Automatic skipping of digital channels on which voice exchange is encrypted by cryptographic algorithm (reduces user fatigue)

AGC system for digital and analog transmissions, which can be programmed individually for each system.

SDS100 allows connection of a GPS receiver for scanning systems with reference to the current location (automatic on / off of systems in motion)

Programmable indication of channel activity - 7 colors and 3 different scenarios

Individual volume correction by frequency or channel

Quick Search mode is analogous to VFO mode in radio stations, which provides free frequency tuning.

Function of temporary (up to 250 pcs.) And permanent (up to 250 pcs.) Frequency pass

Scheme with triple frequency conversion, which virtually eliminates the possibility of internal interference in the scanner

Ability to shift the inverter conversion scheme to eliminate interference interference in the event that it did occur

10 defined frequency search ranges with distribution by services (services). Based on the North American frequency distribution.