Lightweight field pants made of wear-resistant and breathable VTX RIPSTOP™ material. Provide high mobility while remaining durable against wear and tear.

The inner side of the waist of the trousers is sewn with a soft moisture-wicking lining. It tightens the fit of the pants to the body, and also protects against possible belt pressure.

The outer surface of the waist is lined with belt loops. In case of its absence, the width of the pants at the waist can be adjusted with Velcro located on both sides. Under the two front straps there are points for attaching carabiners or pouches. There is a large Velcro fastener above the central zipper.

There are 6 pockets on the front, three on each side. A special compartment for a knife with a clip, a marker or a flashlight is sewn into the left upper pocket. Similar smaller compartments are flush with zippered pockets. The manufacturer recommends using these pockets for cell storage. Even lower, there are Velcro cargo pockets with internal fasteners for a bottle or magazine. On the sides, there are neatly made connectors for stretching the pockets when they are loaded. All front pockets are lined with 3D mesh.

There are two upper pockets on the back, which are also closed with Velcro.

A special insert is sewn in the crotch area, which prevents pressure due to the convergence of seams at one point. In addition, its presence has a positive effect on motor activity in these pants.

In the knee area there is a large reinforcing insert that starts under the cargo pockets and ends below the knee. 3D nets are sewn on the inside of the knees. The construction of the pants allows the use of Airflex Field knee pads (sold separately).

Drawstrings are placed on the trouser legs, thanks to which the bottom of the trousers can be adjusted according to the shape of the leg. They are fixed by tying a knot.

The manufacturer provides advice on how to care for the pants: machine wash in warm water and do not use fabric softeners, bleaches, or starch. Tumble dry at low temperature and do not iron. Please note that the trousers retain their shape and original size after washing.

Features:

- wear resistance and lightness;

- breathable properties of VTX RIPSTOP™ material;

- rip-stop fabric type;

- moisture-wicking inner lining in the waist area;

- adjustable waist width;

- points for attaching pouches or carabiners;

- 8 pockets: 2 each in front and back, 2 cell pockets in the hip area, 2 cargo pockets;

- a compartment for a knife, stationery or a flashlight;

- 3D mesh lining in the front pockets;

- insert in the crotch area to avoid pressure with seams;

- reinforcing insert in the knee area with 3D mesh stitching inside;

- compatibility with Airflex Field knee pads;

- fasteners on the trouser legs;

- made in the USA.

Material: main body: 61% nylon, 37% cotton, 2% spandex; lining: 100% polyester.

NSN: 8415-01-689-8383