|
In stock
|
Out of stock
|
||
|
|
|||
|
|
|||
Lithium polymer battery from Dynamics Technologies. When choosing a battery, it is recommended that you measure the dimensions of the drive's battery compartment and compare these dimensions with the battery.
Operating conditions
Maximum allowable charge: 12.6 V.
The maximum allowable discharge: 9 V.
Optimal charge/balancing current: up to 1 A.
Optimum discharge current: up to 25 A.
Maximum discharge current (10 sec): up to 40 A.
Permissible outside temperature during battery operation: 0…+50ºС.
Permissible outside temperature during battery storage: 0…+50ºС.
Scope of delivery: Dynamics Technologies LiPo 11.1V 1300mAh, T-connector male
Characteristics
Type: LiPo
Working voltage: 11.1V
Capacity: 1300mAh
Service life: ~300 cycles (when used correctly)
Power wires: Silicon 16AWG
Balance wires: Silicon 22AWG
Size: 7.3 x 0.7 x 0.5 in
Weight: 4 oz
For LiPo and Li-Ion batteries, the warranty only covers switching on. The product cannot be returned or exchanged in the future!
Do not allow the battery to discharge below the maximum permissible level (3 V per section), this may cause damage, and in some cases, fire. An unused battery must be charged to 70%.
When using, it is also important not to allow overcharging above 4.2 V per section. The battery must be charged at room temperature. To maintain performance when charging, you must use balancing when connecting.
Do not allow the battery to completely discharge!
Do not store the battery at temperatures below 0 °C.
Do not use the machine at temperatures below -1 °C.