|
In stock
|
Out of stock
|
||
|
|
|||
|
|
|||
High-Performance 11.1V Li-Po Battery for AEG Airsoft Rifles
Lithium-Polymer (Li-Po) batteries represent the next step in power cell evolution, succeeding the traditional Li-Ion technology. Their primary advantage lies in the exceptional capacity-to-size ratio. Extremely compact and lightweight, these batteries provide high energy efficiency, making them an ideal fit for almost any AEG airsoft replica.
Key Benefits:
-
No Memory Effect: Li-Po cells do not require full discharging. In fact, frequent top-up charging is the optimal way to extend their lifespan.
-
Low Self-Discharge: When stored, the battery loses only about 3–5% of its charge per month.
-
Cold Weather Reliability: Li-Pol batteries maintain solid performance even in low temperatures (note: charging must be done at room temperature).
-
Lifespan: With proper maintenance, this battery offers between 500 and 700 charging cycles.
Safety Warning: Avoid discharging the battery below $3$ V per cell. Prolonged storage in a discharged state can cause irreversible chemical damage, swelling, or fire hazards. Always use the balancing connector during the charging process with a compatible smart charger.
Specifications:
-
Technology: Li-Pol
-
Capacity: 1300 mAh
-
Voltage: 11.1 V
-
Cell Count: 3S (3 cells)
-
Discharge Rate: 20/40C
-
Connector Type: Tamiya mini
-
Dimensions: 130 x 20 x 20 mm
-
Weight: 95 g
For LiPo and Li-Ion batteries, the warranty only covers switching on. The product cannot be returned or exchanged in the future!
Do not allow the battery to discharge below the maximum permissible level (3 V per section), this may cause damage, and in some cases, fire. An unused battery must be charged to 70%.
When using, it is also important not to allow overcharging above 4.2 V per section. The battery must be charged at room temperature. To maintain performance when charging, you must use balancing when connecting.
Do not allow the battery to completely discharge!
Do not store the battery at temperatures below 0 °C.
Do not use the machine at temperatures below -1 °C.