In stock
|
Out of stock
|
||
|
Microprocessor-based charger ElectroRiver Wave Charger with a balancer. The charger has a built-in power supply for 100/240VAC direct power supply and an additional 11V to 18VDC power outlet. Allows you to charge cells such as Li-Pol, Li-Ion, Li-Fe, Li-HV, Ni-Cd, Ni-M and Pb.
Key Features of the Electro River Wave Charger:
Optimized software - The charger has an AUTO function that regulates the voltage during charging or discharging. This feature is especially useful for lithium batteries, where it is easy to overcharge the battery, which can result in damage or even an explosion. Built-in balancer - allows you to control each cell of the battery, which allows you to equalize the voltage on each cell during charging and discharging.
Fast Charge Mode and Lithium Battery Storage Mode - The charger software allows you to quickly charge batteries and charge them to the level required for storage.
Input power control - due to the range that the charger operates, it can be powered by a car battery. If the voltage drops below the specified value, the charger will automatically stop working.
Automatic limitation of the charging current - when charging Ni-MH or Ni-Cd batteries, you can set the upper limit of the charging current.
Characteristics:
Supply voltage: 100/240VAC
11 V to 18 V DC
Supported Batteries:
Lithium: Li-Pol / Li-Ion / Li-Fe - 1S to 6S
Nickel: Ni-Mh/Ni-Cd - 1 to 15 cells
Lead Acid - 2V to 20V
Maximum consumed charging current:
80W (DC input)
50W (AC input)
Charging current range: 0.1A to 8A
Maximum current consumption when discharging: 10 W
Discharge current range: 0.1A to 2A
Li-Pol balancing current: 460mAh/cell
Dimensions: 135 x 145 x 43 mm
Weight: 590 g