Delivering serious tactical functionality and a perfect look, the new Combat G3 tactical pants embody the middle ground between professional looks and practicality. It is the perfect choice for those looking to enhance functionality but must wear a uniform with a traditional design. The simple pocket design and refined fit ensure the Combat G3 pants integrate well with the classic uniform.

The belt with wide loops allows the use of belts up to 4.5 mm wide. The front belt loops are equipped with loops for which, for example, key retractors can be attached.

The belt can be adjusted in volume due to the built-in slings with pullers, fixed with Velcro. The range of adjustments is significant. The fly is made using a YKK zipper. And its top closes with Velcro.

The back slit pockets are quite roomy and closed with YKK zippers, covered at the bottom with the main fabric, and at the top with an elastic insert. The back of the pants is reinforced with a second layer of fabric. Due to the good angle and low position of the front mortise pockets, access to them is not blocked by additional equipment. The pockets are moderately deep and have a sewn eyelet for water drainage.

Velcro closure at the front patch pockets. They contain shock cords for adjusting the height of the knee pads, equipped with clamps.

The hip pockets are puffy and set slightly back. This arrangement of pockets is very convenient. Close with Velcro.

There are also lower pockets in the shin area, which are closed with Velcro.

At the bottom, there are pant leg volume adjusters that allow you to conveniently pull them along the boot volume. The pants can be installed with integrated knee pads. The position of the knee pads can be set using two latches. The volume adjustment is carried out by pulling the element onto the Velcro, and the height adjustment is carried out with the help of a shock cord brought into the pocket from above.

All stretch inserts are in the color of the trousers for complete concealment.

Reinforced double seams.

Knee pads are not included

Made in the USA

Material: 50% nylon / 50% cotton rip-stop

Overview

Size chart

The size consists of a two-digit number and a letter, where the number is the waist circumference and the letter is the length of the pants. For example, 40R: 40 is the waist circumference — see Table 1; R (Regular) is the length of the pants — see Table 2.

Table 1 — Matching G3 Combat Pant size to waist circumference

Table 2 — Matching the G3 Combat Pant size to the user's height