Shooters Global Timer, from the Shooters Global brand, is an entry-level budget device that is endowed with almost all the basic features you need, both for independent training and with a partner/instructor.

In addition to the device itself, the kit includes a small 30 cm cord for charging the built-in battery, as well as a one-page, but quite detailed and well-written instruction in Ukrainian.

The timer is made in an elongated rectangular case made of matte plastic, the length of which does not exceed 120 mm, width 49 mm, and thickness 35 mm, with a clip; the thickness will increase to 40 mm. The housing is protected from dust and splashes. The total weight of the device is no more than 163 grams.

On the front side, there is a perforation for a microphone in the form of a brand logo; on the back side, there is only a removable steel clip. On the sides of the timer, there are two buttons, which in the basic mode are responsible for scrolling through the results in the current session. After a long press, the button on the right side allows you to scroll through the recorded sessions, as well as to clear the memory, where up to 32 sessions can be stored simultaneously. Pressing the button on the left enters the menu for adjusting the microphone sensitivity level and enabling/disabling the sensitivity cut-off (ATT). At the bottom of the timer, there is a Micro-USB port, which is protected by a silicone plug, LED indicators for the charging process, and reset buttons to factory settings. The provided Micro-USB port allows charging the built-in battery with a declared capacity of up to 1200 mAh, which should be enough for 16 hours of operation. In our tests, a fully charged battery lasted 15 hours and 37 minutes, according to the indicator.

At the top of the Shooters shooter timer is a small LCD with a two-row data output, as well as the main button for starting and stopping the timer. The initial screen displays information about the battery charge level, the best split, the session number, and the total number of shots in the series, as well as the number of the last shot and its time. Session recording is activated by long pressing the main button, then, with a delay of 3 seconds, a sufficiently loud sound signal will sound, indicating the start of recording.

Model without Bluetooth function

​​​​​​Overview timer