In stock
|
Out of stock
|
||
|
MiBoxer C8 Smart Charger is a universal multi-channel charger for Ni-Mh, Li-Ion and LiFePO4 batteries with 8 channels. The main distinguishing feature of the Miboxer C8 charger is the presence of eight universal independent channels, with which you can charge from 1 to 8 batteries at the same time. This charger can charge almost all form factors of household batteries: AA, AAA, C R14, 18650, 14500, 16340, etc. Miboxer C8 works with batteries of different composition: Li-Ion 4.2/4.35V (IMR/ICR/INR) , LiFePO4 3.6V and NiMh/NiCd 1.48V. This model has a movable negative contact, thanks to which each slot in the charger is universal. Charger Miboxer C8 is equipped with a large backlit display that displays all the information about the rechargeable batteries: cell type, charge level, voltage, internal resistance, charge current and capacity. The charger is made of special flame-retardant plastic.
The maximum charge current per channel is 1.5A.
Features of MiBoxer C8:
Charge - full battery charge, per-channel control.
Test - testing the real capacity in the process of charging, as well as measuring the internal resistance of each battery.
Drop charge - charge with a small current after the completion of the main charge cycle.
Activation of deeply discharged Li-Ion batteries - the device can activate over-discharged Li-Ion batteries to raise the voltage and enable further operation.
Automatic shutdown after the batteries are fully charged.
Compatible batteries in MiBoxer C8:
Ni-Mh/Ni-Cd (1.48V): AAAA, AAA, AA, A, SC, C (R14), SC.
Li-Ion (4.2/4.35V) (IMR/INR/ICR), LiFePO4 (3.6V) , 16500, 16650, 16340 (RCR123a)
MiBoxer C8 Charger Features:
8 independent channels
The Miboxer C8 charger is one of the few models that can charge up to 8 18650 batteries at the same time.
Versatility
Charger Miboxer C8 works with batteries of various composition and various form factors. It can charge almost any type of Ni-Mh, Ni-Cd, Li-Ion and LiFePO4 household batteries from AA to C (R14) and 10340 to 26650.
Large LCD display with backlight
The Miboxer C8 charger is equipped with a large backlit display that displays all the necessary information in real time: battery capacity, charge current, voltage, internal resistance, battery type, charge level for each channel, operating time.
Automatic mode of operation
Charger Miboxer C8 automatically detects the type of inserted battery and selects the required charge current and voltage. After the end of charging the batteries, the charger will automatically stop supplying current and notify you of the end of the charging process. For LiFePO4 batteries and Li-Ion batteries at 4.35V, you must set the cell type in manual mode. Also, if necessary, you can set the charge current in manual mode.
Activation and recovery of deeply discharged Li-Ion batteries ("0V")
Miboxer C8 has a function to activate over-discharged lithium-ion batteries. Using this function, you can return to work Li-Ion batteries that were not used properly and were allowed to be deeply discharged below 2.5V.
Battery capacity measurement function
This charger can measure the actual battery capacity during charging and display the capacity value on the screen. Thanks to this function, you will always know how worn out your battery is and how much capacity you can
4 levels of protection
Overcharge protection;
Overdischarge protection;
Reverse polarity protection;
Short circuit protection.
Compatible with 12V car adapter