The folding model Ganzo G768 is a bright and functional knife of universal type, which is not only convenient for performing basic tasks in domestic conditions but can cope with complex challenges in conditions on the verge of extreme.
The tool has an aggressive and memorable design, in which the main attention is drawn to the blade length of 88 mm. Its clip-point profile with a characteristic bevelled edge closer to the tip of the blade improves the knife's stabbing performance and allows for precise and accurate cuts. However, the thin point is more susceptible to damage, so you should use the blade only for its intended purpose and not test its strength by putting it under excessive strain.
The blade material is D2 steel with 12% chromium content. This feature of the composition increases corrosion resistance to metal, allowing you to use the knife in almost any condition. The main thing is not to forget about the need for periodic maintenance of the steel and wiping it dry after each use of the blade.
A no less important feature of the model is the presence of a long finger stop on the 3-millimetre edge, which makes it easier to hold and use the knife with the owner of a wide palm.
The blade can be removed from the hilt in one of two ways: by pressing the spike or by hooking your finger on the hole closer to the edge. To lock the blade in the open position, simply slide the Axis lock pin and the tool is ready for use.
The two pads on either side of the handle are made of G10 fibreglass and provide a comfortable, non-slip grip thanks to a textured and skin-friendly surface. Other advantages of the material include resistance to temperature fluctuations and chemical compounds, resistance to fading and high durability, which eliminates the possibility of cracks if the knife is accidentally dropped.
The folded dimensions are 117mm (length) x 12.7mm (thickness), which, combined with a weight of 116.9g, makes the knife easy to carry in your pocket. It also features a steel clip that can be attached to either the left or right side of the handle.
Specifications
Blade material: D2 steel with ±60 HRC hardness
Blade profile: clip point
Sharpening type: straight
Type of locking mechanism: Axis Lock
Handle material: fibreglass G10
Open knife length: 205 mm.
Blade length: 88 mm
Bevel thickness: 3 mm
Hilt length: 117 mm
Hilt thickness: 12.7 mm
Weight: 116.9 g
