Pattern Generator for AN/PEQ-16 is an interchangeable attachment for the laser module, designed to form a specific laser beam geometry instead of the standard dot. It is installed on the front of the device in place of the standard protective cap.

The accessory allows for the modification of the laser emission shape (visible or IR – depending on the PEQ-16's operating mode), creating clear geometric patterns for marking, identification, or training scenarios.

Important: The size of the projection on the target depends on the distance to the object. The mentioned 6 mm and 10 mm measurements refer to the diameter of the forming apertures within the attachment itself.

Features

• Compatible with AN/PEQ-16 and AN/PEQ-16A;

• Installed in place of the standard front cap;

• Shape variants:

  • 2 circles (Ø 6 mm – diameter of the forming apertures);

  • 1 circle (Ø 10 mm – diameter of the forming aperture);

• Lightweight housing made of durable polymer;

• Flexible rubber strap for secure fixation and loss prevention;

• Tool-less installation.

Purpose

- Forming an alternative laser beam geometry.

- Marking targets or positions at night.

- Use in conjunction with night vision devices (when operating in IR mode).

- Training scenarios involving IR signaling.

- Group identification during night operations.

Advantages

1. Expands the functionality of the laser module.

2. Allows for the adaptation of the beam shape to specific tasks.

3. Convenient for field use.

4. Minimal weight and dimensions do not affect weapon balance.

Scope of Application

- Military units;

- Training with night vision devices (NVD);

- Tactical marking scenarios;

- Training centers and instructor programs.

 

Specifications

Material: Polymer, rubber

Housing Diameter: 30 mm

Forming Apertures: 2 units – 6 mm/1 unit – 10 mm

Strap Length: 40 mm

Weight: approximately 4 g