In stock
|
Out of stock
|
||
|
Compact, lightweight and at the same time powerful Fenix UC35 V2.0. Thanks to the installation of modern components, this model has not only excellent brightness, but also quite low power consumption, due to which it is able to work longer than analogues from other manufacturers. This flashlight is equipped with a Cree XP-L HI V3 LED, which is able to work with a brightness of up to 1,000 lumens, while creating a directional light flux with a range of up to 266 meters. Thanks to the built-in digital voltage stabilizer, the output beam of light will not go out or flicker at gradual discharge of the accumulator.
Another advantage of this model is the presence of a well-designed cooling system and built-in thermal controller. The "last", in automatic mode, constantly monitors the temperature of the lantern and when it reaches 60 ° C reduces the maximum power level until it cools down.The user has 6 operating modes, which in turn are switched by a button located near the "main" part made of stainless steel. Due to the presence of the "memory" function, when you turn on the flashlight, the last selected operating mode will be "started". The same button has a built-in charge level indicator (a pair of green and red LEDs). With the help of the rubberized end button fast access to such operating modes as "Stroboscope" and "Turbo" is provided. If necessary, you can install branded accessories, such as a remote button and mounting for weapons, so the model Fenix UC35 V2.0 can be used as a hand lantern and as a barrel.
The Fenix UC35 V2.0 comes with a branded Li-ion Fenix ARB-L18 battery. However, if necessary, you can also use to power the lantern lithium-ion batteries 18650 with a voltage of 3.6-3.7 V from other manufacturers, a pair of lithium batteries CR123A or two LiFePO4 batteries with a voltage of 3.2 V made in size 16340 (Fenix UC35 V2.0 is not able to charge this type of battery).
The Fenix UC35 V2.0 case is made of high-quality aluminum alloy, the surface of which has been anodized according to the HA III standard. This, combined with excellent assembly and thoughtful design, allow this lantern to withstand falls from a height of 1 meter, immersion and operation under water, as well as long enough to retain its original appearance. By the way, the degree of dust and moisture protection of Fenix UC35 V2.0 lamps fully complies with the international standard IP68.
Specifics:
the lamp is completed with the Cree XP-L HI V3 LED;
the service life of the LED is 50,000 hours;
the lens is made of tempered mineral glass and has a special anti-glare coating;
brightness level - up to 1000 lumens;
luminous flux intensity - up to 17,000 cd;
the maximum lighting range is 266 meters;
model Fenix UC35 V2.0 has a built-in digital current stabilizer;
there is protection against overheating;
lamp Fenix UC35 V2.0 has 6 operating modes;
controls - 2 keys (near the "main" and in the end of the case);
there is a function of "memory";
power of a lantern can be carried out from one lithium-ion accumulator of the 18650 format, from pair of lithium batteries of the CR123A standard size or from two LiFePO4 accumulators executed in the 16340 standard size;
there is protection against reverse polarity;
there is a charge level indicator (built into the metal key located near the "main" part);
the installed battery can be charged via the built-in micro-USB port;
the case is made of aviation aluminum alloy;
anodized housing surface according to HA III standard;
a special knurl is applied to the surface of the case, which prevents the lantern from slipping out of the palm;
Fenix UC35 V2.0 lamp withstands falls from a height of 1 meter and prolonged immersion,
as well as operation in water up to two meters (IP68);
weight: 89 g