In stock
|
Out of stock
|
||
|
The Fenix HL18R-T is a lightweight headlamp designed for trail running. The headboard with a nice design has two power supplies that are controlled by two independent switches. You can use a lithium-polymer battery ARB-LP1300. Also, 3 AAA batteries can act as a power source. Headlamp power supplies ensure reliability during long runs on poorly lit roads. When using this headlamp, you will always have good quality lighting when needed.
Nalobnik provides users with a safe pastime in the dark. Reflective inserts were provided on the headboard. In addition, the tape is made to help remove sweat. It will be convenient for you to use a lantern even at considerable physical activities. There is a micro-USB cable for charging. The maximum luminous flux is 500 lumens, and the duration of the headlamp is 20 hours (high beam).
Three high beam modes and two low beam modes are available. Two LEDs are used, CREE XP-G3 S3, which provides Neutral White Light, and EVERLIGHT 2835, which generates White Light Stream. The mount uses a patented rotating clasp, the mount itself can be adjusted in size with literally one hand, which is very convenient. The lantern provides a stream of light at a maximum distance of 82 meters.
There is a function to indicate the battery charge level. More details about the specifics and benefits of the Fenix HL18R-T model.
Management
The Fenix HL18R-T lamp is controlled by two switches. The high beam button is needed to turn the flashlight on and off, in order to switch between different operating modes. It also serves to lock the device and select the high beam mode. The low beam button is required to turn the headlight on and off to switch between modes, as well as to lock and activate the low beam mode.
To activate the Fenix HL18R-T, press and hold the high beam button. It will automatically turn on in high beam mode. If you press and hold the low beam button, the model will automatically turn on in low beam mode. Pressing and holding any of these switches for half a second will help turn the flashlight on or off.
To lock the model, press and hold any of the provided switches in the off state. Or press both buttons simultaneously for three seconds. After this action, the headrest flashes at least 4 times, indicating that it is locked. To remove the lock, you must simultaneously press the two buttons for three seconds. The model flashes quickly again 4 times, then turns on in the minimum mode of low beam.
Headlight glow modes
High beam.
In maximum mode, the brightness corresponds to 500 lumens. Operating time with lithium-polymer battery reaches 3 hours, with AAA batteries - 4 hours. The distance of the beam is 82 meters. Luminous flux intensity-1700 candelas.
On average, the luminous flux is 200 lumens, with a lithium-polymer battery the operating time reaches 8 hours, and with AAA batteries - 11 hours. The distance to which the ray of light propagates reaches 54 meters. Light intensity-749 candelas.
Minimum mode: brightness is 70 lumens, with a battery shines for 20 hours, with AAA batteries - also 20 hours. Beam distance - 35 meters. Intensity-310 candelas.
Low beam.
In the minimum mode, the luminous flux is 30 lumens, with a lithium-polymer battery operating time reaches 30 hours, with AAA batteries - 43 hours. The light propagates at a distance of 12 meters. Intensity-38 candelas.
In SOS mode, the brightness is 4 lumens, with a battery the glow time is 300 hours, with AAA batteries - also 300 hours. Beam range - 5 meters. Intensity-8 candelas.
These performance indicators of the lantern were obtained through laboratory experiments. To do this, we used a 1300 mAh lithium-polymer battery, as well as three AAA batteries. The air temperature was about 21 (+ - 3 degrees Celsius), and humidity - about 50-80 percent. The actual performance of the headrest depends on the batteries used, as well as on the environmental conditions in which the lantern operates.
The battery provided with the headlamp can be charged through the flashlight itself. It is strictly forbidden to charge AAA batteries in the lantern. There is an indication of the degree of charge. To display the status of the charge, you must press any of the switches once when it is off. The charge status will be displayed for a few seconds.
When four indicators are lit, it indicates that the charge reaches 80-100 percent.
If three indicators are lit, then the charge is 60-80 percent.
Two indicators show that the charge level has dropped to 40-60 percent.
One burning indicator shows that the charge is 20-40 percent.Finally, if a single indicator flashes, it indicates that the charge is less than 20 percent.
The headrest provides a default protection function against overheating of the case. During operation, the model accumulates a lot of thermal energy. There is an option to reduce the brightness so that strong heat does not interfere with the work. It shrinks by several lumens when the body temperature exceeds 65 degrees Celsius. Once the lantern has cooled, it is possible to return to the previous mode.
Physical parameters of the model
The dimensions of the headband are 68.5 * 45 * 39.5 millimeters. Weight is 63.2 grams, taking into account the weight of the mount on the head, but excluding batteries. In the manufacture of the headrest used plastic and aluminum of good quality, the headrest is made by the technology of three-time injection molding. Withstands falls from a height of one meter, without damage and breakage. It also has protection against dust and moisture according to the IP66 standard.
Characteristic:
nalobnik for tourism, active recreation;
two power sources: ARB-LP1300 battery, AAA batteries;
maximum brightness-500 lumens;
Lighting distance - 82 meters;
five operating modes;
controlled by two buttons;
diodes: CREE XP-G3 S3, EVERLIGHT 2835;
micro-USB charging;
indication of the degree of charge;
protected from overheating of the case;
protected from moisture and dust according to the IP66 standard;
materials: good quality plastic and aluminum;
dimensions of a lantern: 68,5 * 45 * 39,5 millimeters;
weight is 63.2 grams.
Complete set:
Fenix HL18R-T headlamp, ARB-LP1300 battery, micro-USB charging cable, user manual