Model Fenix ​​HM50R V2. 0 is a rechargeable multifunctional headlamp. It will be useful during outdoor activities and tourism, for example, when it comes to camping, hiking, or working in low light conditions. It is powered by a rechargeable 16340 Li-Ion battery and this battery is included. The maximum luminous flux is 700 lumens, and the beam range is 115 meters. For operation of the model, a diode of the famous manufacturer Cree XP-G3 S4 is used, the lighting is white. The service life of such a diode reaches 50 thousand hours. In addition to white light, red light is also possible here.
The detachable design of the lantern allows it to be used as a hand-held model as well. To quickly and easily charge the battery, there is a USB Type-C port. To prevent the flashlight from randomly turning on when it is not needed, it can be blocked.
Below are more details about the features and functions of the flashlight.
Lantern control
To turn on the model: press and hold the button for half a second to turn on the white light mode. If you want to switch to red light mode, press the button twice while the headband is off. For an exception: with the model turned on, hold down the switch for literally half a second.
To activate the white light mode, you need to press the button once, and it will switch between minimum → medium → maximum → Turbo modes. At the same time, the flashlight has a function of remembering the applied mode. To enter the red light mode, press the button once, it will switch between red→red flash levels. In this case, the memory does not work.
To lock out the flashlight: With the power off, press and hold the switch for three seconds before the flashlight glows white. After that, it will blink red four times, indicating that the lock is active.
To unlock the model, you need to press the button for three seconds, after which the flashlight will blink red four times. So it will go into red lighting mode.
Modes:
white lighting
Turbo brightness is maximum here, 700 lumens. The duration of the work is one hour. The range of the beam is 115 meters, and the intensity of the light flux is 3350 candela.
Maximum. The illumination brightness is 400 lumens. The headband works in this mode for three hours. The distance of the beam is 86 meters. The illumination intensity is 1849 candela.
Average. The brightness of the illumination reaches 130 lumens, the operating time is eight hours. The range of the beam is 49 meters. The flow rate is 596 candela.
Minimum. Luminous flux - 30 lumens, glow time - 42 hours. The range of the beam is 23 meters. Illumination intensity - 128 candela.
Red light
In the "red" mode, the model provides five lumens of brightness, works in this mode for 60 hours, and the beam range is six meters. The intensity of the luminous flux is 9 candela.
"Red flashes": in this mode, respectively, five lumens of brightness, 120 hours of operation, six meters - the range, and the illumination intensity is nine candela.
* It should be mentioned that the given parameters of the glow of the flashlight were obtained during experiments in the laboratory. Where were the following conditions: used an ARB-L16-700P Li-ion battery, the air temperature was approximately 21+-3 degrees Celsius, and the humidity was 50-80 percent. If the environmental conditions, as well as the battery used, are different, then the performance will change.
The flashlight has a reliable protection against overheating of the housing. During operation, any flashlight accumulates a lot of thermal energy. So that this does not interfere with the normal functioning of the headband, a function was provided to lower the brightness of the lighting. When the temperature reaches 60 degrees or higher, the default brightness of the light will drop a little. When the temperature drops beyond 60 degrees, you can return to a more powerful mode.
Charge level indication: with the flashlight off, press the indicator will turn on for three seconds. If the green light is on, then the charge is 80-100%. If blinking green, then 50-80%. If the red light comes on, then the charge is 20-50%. And when it flashes red, it means that the charge remains 0-20%, and it needs to be charged.
The lantern is made of strong a6061-T6 aluminum. Made of high quality anodizing, which protects the case from abrasive influences. Dimensions are 64*36*32 mm. Weight is 78 grams, including battery and main mount. Reliable protection against moisture, dust, damage and scratches of the case is provided.
Characteristics:
headband for tourism, outdoor activities;
The highest lighting brightness is 700 lumens;
beam distance: 115 meters;
powered by a 16340 battery;
shines on Cree XP-G3 S4 diode;
light type: white, red;
six levels of brightness;
charging takes place via USB Type-C;
there is a blocking option;
can be used as a manual model;
controlled via a switch;
There is a low voltage warning function;
protected from overheating;indication of the battery charge level;
easily tolerates a fall from a height of two meters;
dust and moisture protection standard: IP68;
material: strong aluminum a6061-T6;
High quality anodizing treatment of the body surface;
dimensions: 64*36*32 mm;
weight is 78 grams, including battery and main mount.
Equipment:
Fenix HM50R V2.0 flashlight, ARB-L16-700P Li-ion battery, USB Type-C charging cable, spare ring, user manual