In stock
|
Out of stock
|
||
|
The Quick Fist Go-Between rubber clamp mount holds tools and equipment from 1 3/4” to 2 1/2” (44 to 63mm) in diameter. Each clamp supports a safe working load of 50lbs, with a break- strength of 150 lbs.
The product is attached using two 0.63 cm (1/4") bolts or screws. The bolts are not included in the kit.
They are actively used on rescue vehicles, 4x4 off-road vehicles, trucks and boats to securely fix various tools and accessories.
Mounting area: 1” X 3.5” (25 x 89 mm)
Grip Size (The diameter of the object you are mounting): 1 3/4” to 2 1/2” (44 to 63mm)
Installation Instructions
Jacknut® Threaded inserts
Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.
Rivetnuts
These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.