In stock
|
Out of stock
|
||
|
The M-Tac Division fleece jacket is perfect for cool or cold weather. In the first case, you can use it as an outer layer, in the second as insulation for a jacket or park. Made from 100% polyester. The structure of the WindBlock membrane lattice is designed for low and extremely low temperatures so that 80% of body heat is reflected from the surface inward and only 20% (excess heat during active actions at low temperatures) goes out through the membrane lattice. Most modern membrane fabrics with surface polyurethane spraying are not designed for the lowest possible temperatures due to the fact that polyurethane hardens at low temperatures, which subsequently leads to hardening of the fabric as a whole. The consequence of this is the characteristic "rustling" when moving. In the membrane thermal fabric WindBlock, to protect the membrane, not polyurethane spraying is used, but a dense polyester-structured bristle (inside and outside the membrane), which protects the membrane from low temperatures, abrasion (both inside and outside) and creates an additional warming air gap from the inside of the garment from WindBlock. Such a three-layer structure of the membrane tissue completely removes the rustling effect. Reinforced with nylon fabric at the elbows. It has a zip and many pockets. On the sleeves, the manufacturer has added Velcro panels for attaching ID stripes. On the back there is a rear cargo pocket in which you can transport gloves and other utilitarian trifles.
Material: 100% polyester
Membrane: 3000 x 3000 g/m2
Features:
- Windproof fleece WindBlock
- Large hood with elastic cord
- 2 shoulder pockets with Velcro panels
- 2 large front pockets
- Service pocket on the sleeve
- Back pocket with two zippers
- Cuffs are adjustable with Velcro
- Reinforced elbows
- Elastic adjustable cord at the bottom of the jacket