In stock
|
Out of stock
|
||
|
The UF PRO Windstopper Liner is an addition to the UF PRO Striker or P-40 pants that provides warming and windproofing properties.
UF PRO Windstopper Lining Features
- Easily attaches to the pants with a zipper located on the outer edge. To attach the lining, you need to position it along the top edge of the pants and zipper.
- Fits all models of UF PRO Striker and P-40 pants (except Striker ULT and P-40 Shorts).
- Provides insulation and 100% wind and cold protection.
- Padded pants can be used down to approximately -10°C (for moderate intensity activity).
- It has an anatomical cut with flat seams and anti-static construction — does not constrain movements and is pleasant to the body.
UF PRO Windstopper Lining Specifications
Outer layer material: 100% polyester (flannel)
Inner layer material: 100% PTFE membrane
Weight (size 34/S): 180 г
How to match the size of Windstopper Lining to your pants
1. Check the size of your pants (it is indicated on the label inside the pants in the waist area).
Example. The specified size 33/32 means: 33 is the width of the pants, 32 is the length of the pants.
2. Determine the lining size using the table below.
Note. For trouser lengths 30–32, the lining is Short (S) length, and for trouser lengths 33–36, the lining is Long (L) length.
Example. If the pants size is 33/32, the lining size should be 33/S.
If the pants size is 33/34 — the lining size is 33/L.
Windstopper Lining size matching table for UF PRO pants
Pants size |
The appropriate lining size |
|
Width |
Length |
|
28 |
30–32 |
W28/S |
29 |
30–32 |
W29/S |
30 |
30–32 |
W30/S |
32 |
30–32 |
W32/S |
32 |
33–36 |
W32/L |
33 |
30–32 |
W33/S |
33 |
33–36 |
W33/L |
34 |
30–32 |
W34/S |
34 |
33–36 |
W34/L |
36 |
30–32 |
W36/S |
36 |
33–36 |
W36/L |
38 |
30–32 |
W38/S |
38 |
33–36 |
W38/L |
40 |
30–32 |
W40/S |
40 |
33–36 |
W40/L |
42 |
30–32 |
W42/S |
42 |
33–36 |
W42/L |
44 |
30–32 |
W44/S |
44 |
33–36 |
W44/L |