The Dexshell Drylite model is a specialised accessory for outdoor activities during the cold season, when the air temperature ranges from 10 to -5°C. Thanks to the anatomical cut and the absence of raised seams, the gloves have a snug fit without the feeling of stiffness in the hands and do not rub the sensitive skin of the palms.

The material of the product consists of three functional layers connected using Dexfuze™ technology — a patented method that avoids delamination of the fabric after prolonged wear and repeated washing. Waterproof properties are ensured by a thin layer of Porelle® membrane, which is a porous film. It prevents the material from getting wet for at least 8 hours of direct contact with water and guarantees optimal breathability to avoid the unpleasant feeling of drying out of the skin.

The outer layer on the back of the hand is made of a combination of polyester and elastane, which forms a dense and mechanically resistant material. The top layer on the inside of the palm consists of three types of fibres: viscose — to prevent the rapid loss of heat produced by the human body, nylon and elastane — to give the material elasticity. Additions in the form of anti-slip elements improve grip on small objects, allowing you to hold a bicycle handlebar, ski poles or fishing rod more firmly.

The inner layer of Dexshell Drylite gloves includes synthetic fibres of acrylic, nylon and elastane, complemented by natural merino wool. This is one of the softest types of wool, protecting muscles and joints from the negative effects of frost and cold drafts. The hygroscopic properties of wool also contribute to the rapid removal of sweat to the top layer, so that hands remain dry throughout the day, and the creatine contained in wool fibres has an antibacterial effect and prevents the appearance of fungi on the skin.

Dexshell Drylite is complemented by polyester overlays on the tips of the thumb and forefinger, so that the user can interact with touch screens of portable technology without removing the glove from the hand. Elastic cuffs tightly fix the products on the wrist, preventing snow and drops of water from getting inside.

Features:

• functional gloves for wearing in winter and mid-season;

• 100% waterproof thanks to Porelle® membrane;

• three-layer material containing natural and synthetic fibres;

• connection of layers using patented Dexfuze™ technology;

• inclusion of merino wool with sweat-wicking and antibacterial properties;

• protection from cold and drafts;

• anti-slip elements on the inside of the palm;

• touch pads on the pads of the thumb and index finger;

• no raised seams;

• elastic cuffs for a snug fit.

Compound

Outer palm: 87% polyester, 13% elastane.

Outer layer on the inside of the palm: 64% viscose, 32% nylon, 4% elastane.

Middle layer: Porelle® membrane.

Inner layer: 40% merino wool, 40% acrylic, 18% nylon, 2% elastane.

Touch pads on fingertips: 100% polyester.

Care instructions

Only hand washing is allowed. The recommended water temperature is not higher than 40°C.

Dry inside out and then on the front side. Do not dry gloves near a heater or open flame to avoid damage to the membrane and delamination of the material.