In stock
|
Out of stock
|
||
|
The charger is designed for safe reusable charging, discharging, testing and recovery of batteries.
Charger designed to charge Ni-MH/Ni-Cd, Li-ion/MR/INR/ICR/LiFePO4 batteries. The body of the charger has a modern and ergonomic design, equipped with an LCD display and two independent battery channels. The charger protects the batteries from short circuit, overcharging, overheating and reverse polarity. With Li-ion / MR / INR / ICR and Ni-MH / Ni-Cd batteries, the device works in automatic mode and does not require control during charging.
Charger operating modes:
CHARGE - battery charge. The charging current depends on the type and number of installed batteries. The screen displays the voltage, current, battery type and charge status in real time.
DISCHARGE - battery discharge. It allows you to extend battery life.
REFRESH - allows you to restore the properties of batteries that have not been used for a long time.
TEST - battery testing. Allows you to measure the current capacity
battery. The maximum capacity is calculated in charge mode.
discharge-charge.
The POWER BANK function allows you to charge external devices when used in
lithium-ion battery device. To do this, you need to connect a USB cable to the charger with charged batteries. The device connected in this way will receive power with a current of 2A and a voltage of 5V until the batteries are discharged.
Specification
- Model:UT201
- Compatible with batteries: Li-ion / IMR: 10440, 14500, 16340, 17500, 17650, 17670, 18490, 18500, 18650, 20700, 21700, 22650, 26500, 26650, 36250; Ni-MH/Cd: AAAA, AAA, AA, A, SC,C, D
- Input: USB Type-C, DC 5V/2A, 10W
- Output 1:DC 4.2V 1A X2/2A X1; DC 3.65V 1A X2/2A X1; DC 1.48V 1A X2
- Output 2:DC 5V 2.1A USB
- Dimensions: 135mm x 73mm x 37mm