In stock
|
Out of stock
|
||
|
Warm winter suit TTX Softshell with padding polyester insulation. The softshell material from which the suit is made consists of three layers: the bottom layer, which absorbs moisture, the middle layer, which warms and transfers evaporation from the body, and the outer layer, which evaporates moisture outward without letting moisture and cold air in. The fleece lining of the suit is pleasant to the touch and does not irritate the body.
The jacket is insulated with a removable padding polyester lining with a density of 300 g/m2, which is secured with zippers and Velcro. There is a pocket on the left side of the lining that is secured with Velcro.
All zippers on the jacket are protected from moisture penetration by a rubber coating.
The hood covers not only the head, but also the neck and chin and is adjustable with two shock cords. There are three Velcro panels on the chest — two narrow horizontal ones and one wider vertical one for placing patches and chevrons. Below there are two vertical pockets.
The same pockets are located on the shoulders. They have large Velcro panels sewn on them for patches.
There are ventilation pockets under the arms without mesh lining.
There are two deep pockets on the inside.
Elasticated cuffs fit close to the body and prevent cold air from getting under the jacket.
The lower edge of the jacket can be comfortably adjusted to the body by pulling it in with shock cords on both sides.
The trousers can be worn with or without a belt thanks to the elasticated waistband. They are fastened with a button and zipper, under which there is a windproof flap.
The trousers have four pockets: two classic slit pockets on the sides and two cargo pockets above the knees, which are fastened with Velcro.
There are connectors for knee pads (knee pads are not included) with elastic bands sewn into the back for a better fit of the knee pads to the legs.
Elastic bands are sewn into the trousers legs, which ensure that the legs fit tightly to the leg and protect from cold wind.